Fracking Engine Fuel Flow Meters

FCM SERIES OVAL GEAR FLOW METERS .1% Accurate

Fracking Engine Fuel Flow Meters

Macnaught’s FCM Flow Meter is well suited to assist the Fracking Community with highly precise, robust Flow Meters for Fuel Consumption & Additive Improvement Measurement.

The Macnaught FCM Oval Gear Flow Meter Includes:

Very high accuracy of 0.1% of flow
Innovative Magnet Mounting design, no mechanical attachment required
Two sizes covering small to large Engine Fuel Measurement
Temperature Sensor Outputs for exact compensation calculations
No Flow conditioning required, perfect for tight installs
Optional Fuel Computer provides net fuel consumption with analog and pulse outputs

Macnaught is the largest Oval Gear Flow Meter MFG Globally and has been since 1964. Our FCM offering has been utilized in Large Engine Mining Truck Diesel Fuel Measurement for many years. Dozens of Large Engine FCM Meter sets have been installed in USA, Canada and South America. Cost effective, easy to install and maintain – all in a uniquely robust design package.

Macnaught “FCM Flow Meter Overview” PDF

Macnaught USA MX Series FCM Flow Meter Overview Video

Flow Meter Placement on Diesel Fracking Engine

Technical Specifications

Flow Meter

MODEL	MX12FCM-02	MX25FCM-02
Port Size	3/4” NPT	1” NPT
Flow Range	2 – 30 LPM	6 – 45 LPM
Max Pressure	150 PSI	150 PSI
Temperature	– 40°C to 80°C	– 40°C to 80°C
Accuracy	±0.1% of reading	±0.1% of reading
K-Factor	7-point calibration	7-point calibration
IP Rating	IP 67	IP 67
Hall Sensor	2x NPN with pull up resistor	2x NPN with pull up resistor
Temp Sensor	PT100	PT100
DIN Connection	M8 6 position	M8 6 position

Display

MODEL	F127
Signal Input	Reed switch NPN – Hall effect sensor
Temperature Input	PT100
Signal Output	4 – 20mA (Loop Powered / Passive)
Power Supply	8 – 30 VDC
IP Rating	IP67
Mounting	Remote Mount
Cable Entry	(2) x PG9 and (1) x M20
Backlight	Yes
Temperature	– 40°C to 80°C