Oil Transfer Equipment

SPRING LOADED PUMPS

S20H OIL PUMP - 5 gallon
S20HA OIL PUMP - 5 gallon ATF filter
S60H OIL PUMP - 16 gallon
S60HA OIL PUMP - 16 gallon ATF filter

The Macnaught range of Spring Loaded Oil Pumps provides the means to automatically dispense by simply pressing the oil gun trigger.

Features

• suitable for engine and gear oils up to SAE140
• oil drain back facility on pump head
• kink resistant hose
• 10 year parts availability
• 5 year warranty (conditions apply)

Specifications

• wetted components: aluminium, steel, zinc, brass, polypropylene, nitrile rubber and PVC
• output 5 gallon: 11.5 oz. per stroke
• output 16 gallon: 17 oz. per stroke

C16 SUCTION GUN

The C16 is ideal for use with gear oils to get them both into and out of gearboxes, transfer cases and differentials. Another useful application is to use the C16 to evacuate the sump of an inboard marine engine.

Features

• suitable for use with non-corrosive fluids up to SAE 90 500mls capacity
• 5 year warranty (conditions apply)

A2H MULTI PURPOSE PUMPS

A quality pump ideal for transferring a wide variety of fluids.

Features

• suitable to pump diesel fuel, lubricating oils up to SAE 90 and other non-corrosive fluids.
• variable handle setting for light or heavy fluids
• telescopic suction tube fits 16 gallon and 55 gallon drums
• convenient bung opener cast on pump head
• fully serviceable
• 10 year parts availability
• 5 year warranty (conditions apply)

Specifications

• wetted components: aluminium, steel, brass and Teflon
• output: approx. 8.5 fluid ounce (oz) per stroke

Supplied with (A2H) or without (A2) 6 ft delivery hose with metal nozzle with the replacement o'rings (nitrile, viton and EPDM) supplied with every pump purchase, the pump can also be used to pump a wide range of solvents and chemicals. To ascertain o'ring compatibility, check out our website, or speak with the liquid manufacturer (quoting the wetted components listed below)

A2 MULTI PURPOSE PUMPS

A quality pump ideal for transferring a wide variety of fluids.

Features

• suitable to pump diesel fuel, lubricating oils up to SAE 90 and other non-corrosive fluids.
• variable handle setting for light or heavy fluids
• telescopic suction tube fits 16 gallon and 55 gallon drums
• convenient bung opener cast on pump head
• fully serviceable
• 10 year parts availability
• 5 year warranty (conditions apply)

Specifications

• wetted components: aluminium, steel, brass and Teflon
• output: approx. 8.5 fluid ounce (oz) per stroke

Supplied with (A2H) or without (A2) 6 ft delivery hose with metal nozzle with the replacement o'rings (nitrile, viton and EPDM) supplied with every pump purchase, the pump can also be used to pump a wide range of solvents and chemicals. To ascertain o'ring compatibility, check out our website, or speak with the liquid manufacturer (quoting the wetted components listed below)

C4 OIL PUMP

Features

• suitable for kerosene, two stroke mix, light viscosity oils and most solvents up to SAE 30
• sliding bung adaptors suit containers from 4 gallon to 6 gallons
• a zinc version (C4-11) is available for use in underground mines
• fully serviceable
• 10 year parts availability
• 5 year warranty (conditions apply)

Specifications

• wetted components: aluminium, steel, nitrile, delrin and zinc (C4-11 only)
• output: approx. 3.4 fluid ounce (oz) on the lift stroke

C7 OIL PUMPS

C7 - standard
CF7 - C7 with CF strainer for auto transmission and hydraulic fluids
C7-11 - zinc version pump for use in underground mines
CF7-11 - zinc version pump with CF strainer

Features

• pumps non corrosive liquids to SAE 140
• delivers approximately 3.4 fluid ounce (oz) on the down stroke
• 6 ft delivery hose with non drip metal nozzle and built-in hose hanger
• sliding bung adaptors suit containers from 4 gallons to 6 gallons
• fully serviceable
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, steel, nitrile, delrin and zinc (C7-11 and CF7-11 only)
• output: approx. 100mls on the down stroke

C11 – 205 litre (55 gallon)

Pumps gear oils to SAE 140 fits 16 gallon to 55 gallon drums. Supplied with a 6 ft delivery hose with non drip nozzle and built-in hose hanger.

Features

• a CF strainer for auto transmission and hydraulic fluids is supplied on the CF11 model
• 10 year parts availability
• 5 year warranty (conditions apply)

Specifications

• wetted components: aluminium, steel, brass, nitrile and delrin
• output:approx 2.5 fluid ounce (oz) per stroke

Use the thumbnails on the left to access product information.

Manual Oil Transfer Pumps

Spring Loaded Pumps
A2H and A2 Multi Purpose Pumps
C4 5 Gallon Bucket Pump
C7 5 Gallon Bucket Pump
C11 and C13 Gear Oil Pumps
C16 Suction Gun

Air Operated Oil Pumps

Heavy Duty R Series Pumps
R100
R300
R500
R1000
Oilmaster Economy Ratio Pumps
T112
T312
T512

Suction Tubes
TB17s
TB23s
TB25s
TB26s
TD42s
TB24s
Feeder Hoses
TB-20K
TD-25K

Oil Dispensing Equipment

Oil Control Handle
HG20
Metered Control Handles
HG50
HG60
Control Handle Accessories
HGNZL
HGFM
HGFNZ
HGREX
HGFEX
Multi Colored Shrouds

Oil and Fuel Meters

TM Fuel Meter
DM100 Flowmeter

AIR OPERATED OIL TRANSFER EQUIPMENT

R100S - stub pump
R100T - drum pump
R100THG - complete system

The R100 1:1 ratio oil pump is designed to transfer oils up to 30 feet (10 metres) and can be used with any of Macnaught's hose end gun range.

Features

• 2" BSP or NPT (M) bung adaptor supplied
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel and brass
• pump ratio: 1:1 (oil pressure is the same as air pressure)
• output: 16 US gal per min of SAE 10 oil at 145psi
• suction tube length: R100S (stub) 8¾" R100T (drum) 36"
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption: 3 cfm/min
• air inlet: ¼" BSP or NPT pump outlet: ¾" BSP or NPT
• foot valve inlet: 1" BSP or NPT

Suitable for oils up to SAE 140, automatic transmission fluid, diesel, kerosene, anti-freeze/anti-boil and soft, self collapsing greases. Designed to fit 205 litre drums (optional extension tube available for stub version). The R100THG (complete system) includes the pump, 900mm (3 ft) suction tube, 3m (10 ft) reinforced delivery hose and a trigger action dispensing nozzle.

AIR OPERATED OIL TRANSFER EQUIPMENT

R300S - stub pump
R300T - drum pump

The R300 3:1 ratio pump can transfer oils up to 100 ft through multiple hose reels and meter/gun systems.

Features

• 2" BSP or NPT (M) bung adaptor supplied
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel and brass
• pump ratio: 3:1 (oil pressure is 3 times air pressure)
• output: 6.5 US gal per min of SAE 10 oil at 145psi
• suction tube length: R300S (stub) 8½" R300T (drum) 35½"
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption: 3 cfm/min
• air inlet: ¼" BSP or NPT
• pump outlet: ¾" BSP or NPT
• foot valve inlet: ¾" BSP or NPT

Suitable for oils up to SAE 140, automatic transmission fluid, diesel, kerosene, anti-freeze/anti-boil and soft, self collapsing greases suitable for 205 litre drums (optional extension tube available for stub version)

AIR OPERATED OIL TRANSFER EQUIPMENT

R500-SERIES RATIO OIL PUMPS
R500S - stub pump
R500T - drum pump

The R500 is designed for workshops requiring fluid transfer over distances up to 50 metres. It is perfect for use with drums and tanks, and through pipelines, one or multiple hose reels and meter/gun dispensing systems.

Features

• built in pressure relief valve for safe operation
• oil lubricator and 2" (male) bung adaptor supplied
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel
• pump ratio: 5:1 (oil pressure is 5 times air pressure)
• output: 7 US gal per min of SAE 10 oil at 100psi
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption: 18 cfm/min
• air inlet: ¼" BSP or NPT pump outlet:
• ¾" BSP or NPT

Suitable for automatic transmission fluid, engine oil, gear oil, hydraulic oil, anti-freeze/anti-boil and compatible fluids up to SAE 140 Suitable for 205 litre drums (optional extension tube available for stub version) Dimensions: R500S (stub) 635mm x 120mm x 120mm R500T (drum) 1325mm x 120mm x 120mm

AIR OPERATED OIL TRANSFER EQUIPMENT

R-SERIES RATIO OIL PUMPS
R1000S - stub pump
R1000T - drum pump

The R1000 10:1 ratio oil ratio pump is the latest addition to the range and has been designed for workshops and systems requiring oil transfer of distances up to 100 metres. It is ideally suited for use with bulk tanks and drums and utilising multiple hose reels and meter/gun dispensing systems.

Features

• built in pressure relief valve for safe operation
• zinc version available if required
• oil lubricator and 2" (male) bung adaptor supplied
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel
• pump ratio: 10:1 (oil pressure is 10 times air pressure)
• output: 4 US gal per min of SAE 10 oil at 100psi
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption: 18 cfm/min
• air inlet: ¼" BSP or NPT
• pump outlet: ¾" BSP or NPT

Suitable for automatic transmission fluid, engine oil, gear oil, and hydraulic oils up to SAE 140D. Designed for 205 litre drums (optional extension tube available for stub version) .Dimensions: R1000S (stub) 605mm x 120mm x 120mm R1000T (drum) 1297mm x 120mm x 120mm

T112 RATIO OIL PUMP

The new T112 1:1 ratio oil pump is designed to transfer oils up to 30 feet and can be used with any of Macnaught's hose end gun range.

Features

• 2" BSP or NPT (M) bung adaptor supplied
• optional TB25s suction tube available
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components: aluminium, zinc and hard chrome plated carbon steel, brass, and nitrile and polyurethane rubber
• pump ratio: 1:1 (oil pressure is the same as air pressure)
• output: 7 US gal per min of SAE 10 oil at 100psi
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption:9 cfm/min
• air inlet:¼" NPT (F) pump inlet:1" BSP or NPT
• pump outlet:¾" BSP or NPT

Stub pump for inclusion in a workshop or mobile bulk oil system suitable for oils up to SAE 140, automatic transmission fluid, engine oil, gear oil and hydraulic oils

T312 RATIO OIL PUMP

The new T312 3:1 ratio oil pump is designed to transfer oils up to 100 feet and can be used with any of Macnaught's hose end gun range.

Features

• 2" BSP or NPT (M) bung adaptor supplied
• optional TB25s suction tube available
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted omponents:aluminium, zinc and hard chrome plated carbon steel, brass, and nitrile and polyurethane rubber
• pump ratio:3:1 (oil pressure is 3 times air pressure)
• output: 4 US gal per min of SAE 10 oil at 100psi
• max. air pressure: 145psi
• min. air pressure: 60psi
• air consumption: 9 cfm/min
• air inlet: ¼" NPT (F)
• pump inlet:1" BSP or NPT
• pump outlet:¾" BSP or NPT

Stub pump for inclusion in a workshop or mobile bulk oil system. Suitable for oils up to SAE 140, automatic transmission fluid, diesel, kerosene and soft, self collapsing greases

T512 OILMASTER

The T512 is a reliable and accurate, air operated, 5:1 ratio oil pump designed to dispense lubricating oils up to 164 feet from bulk tanks or drums through pipelines, Macnaught's Retracta hose reels, and hose end delivery guns with or without a meter.

Features

• 2" BSP or NPT (M) bung adaptor supplied optional
• TB25s suction tube available
• 5 year warranty (conditions apply)
• 10 year parts availability

Specifications

• wetted components:aluminium, zinc and hard chrome plated carbon steel, brass, and nitrile and polyurethane rubber
• pump ratio:5:1 (oil pressure is 5 times air pressure)
• output: 5 US gal per min of SAE 10 oil at 125psi
• max. air pressure:145psi
• min. air pressure:60psi
• air consumption:9 cfm/min
• air inlet:¼" BSP or NPT
• pump inlet:1" BSP or NPT
• pump outlet:¾" BSP or NPT

Stub pump for inclusion in a workshop or mobile bulk oil system. Suitable for oils up to SAE 140, automatic transmission fluid, diesel, kerosene and soft, self collapsing greases.

HG40 Oil Control Gun
MECHANICAL METER

The T512 OILMASTER® is an air operated 5:1 ratio stub pump that delivers up to 4 gallons per minute. This is a very quiet pump that is ideal for all workshops where transfer of lubricating oils over varying distances through hose reels with dispensing nozzles and/or meters is required.

The T512 Oilmaster® is supplied as a stub pump with a 2" BSP bung adaptor, and 25mm 1" BSP (F) oil inlet. T512 pump is ideally suited for the MACNAUGHT HG60, HG50, and HG40 oil control guns series and RETRACTA hose reels.

• UP TO 30 LITRES (8 US GAL) PER MINUTE
• NON-DRIP NOZZLE
• LATCHING HANDLE WITH TRIGGER LOCK (NON-LATCHING MODEL AVAILABLE)
• ACCURACY + OR - 1% OF READING
• FULLY SERVICEABLE
• HEAVY DUTY CONSTRUCTION
• MAXIMUM WORKING PRESSURE - 1500 PSI
• OVAL GEAR METER (FOR OPTIMUM ACCURACY)
• TWO OUTLET NOZZLE POSITIONS (IN LINE OR 90 DEGREES)
• COMPLETE WITH RIGID EXTENSION
• RESETTABLE TOTALIZER 4 DIGITS
  BALL BEARING SWIVEL

HG50 Oil Control Gun
ELECTRONIC METER

UP TO 8 GALLONS PER MINUTE
SELECTABLE ALARM
SHOCK RESISTANT
MAXIMUM WORKING PRESSURE 1500 PSI
LATCHING HANDLE WITH TRIGGER LOCK (NON-LATCHING MODEL AVAILABLE)
COMPLETE WITH RIGID EXTENSION AND NON-DRIP NOZZLE
6 DIGIT RESETTABLE AND ACCUMULATIVE TOTALS
OVAL GEAR METER (ACCURACY + OR - 0.5% OF READING)
TWO OUTLET NOZZLE POSITIONS (IN LINE OR 90 DEGREE)
HEAVY DUTY CONSTRUCTION
FULLY SERVICEABLE
USES TWO STANDARD AA BATTERIES
BALL BEARING SWIVEL

Special Electronic Features

THE HG50 ELECTRONIC OIL GUN HAS BEEN DESIGNED USING LATEST TECHNOLOGY
EEPROM RETENTION: ALLOWS ALL INFORMATION TO BE RETAINED IF THE BATTERIES ARE REMOVED
SLEEP MODE: WHEN THE GUN HAS NOT BEEN USED FOR 2 MINUTES, THE ELECTRONICS WILL GO TO "SLEEP". THIS PRESERVES BATTERY LIFE. BATTERY LIFE EXPECTANCY IS 12-18 MONTHS (DEPENDING ON USE).
THE GUN CAN BE USED IN MANUAL MODE IF REQUIRED
3 VOLT TECHNOLOGY FOR LONG BATTERY LIFE

HG60 Oil Control Gun

UP TO 8 US GALLON PER MINUTE
SELECTABLE ALARM
SHOCK RESISTANT
MAXIMUM WORKING PRESSURE 1500 PSI
LATCHING HANDLE WITH TRIGGER LOCK
COMPLETE WITH RIGID EXTENSION AND NON-DRIP NOZZLE
6 DIGIT RESETTABLE AND ACCUMULATIVE TOTALS
OVAL GEAR METER (ACCURACY + OR - 0.5% OF READING)
TWO OUTLET NOZZLE POSITIONS (IN LINE OR 90 DEGREE)
HEAVY DUTY CONSTRUCTION
SPARE PARTS AVAILABILITY GUARANTEED FOR TEN YEARS
FULLY SERVICEABLE
USES TWO STANDARD AA BATTERIES
Special Electronic Features

THE HG60 PRE-SET ELECTRONIC OIL GUN HAS BEEN DESIGNED USING THE LATEST TECHNOLOGY.
THE SELF CORRECTING ALGORITHM ALLOWS THE METER TO MEASURE AND SELF CORRECT ANY VARIANCE IN OIL FLOW.
EEPROM RETENTION: ALLOWS ALL INFORMATION TO BE RETAINED IF THE BATTERIES ARE REMOVED
FAIL SAFE: IF LOW VOLTAGE IS DETECTED THE PRE-SET FUNCTION IS LOCKED OUT. IF A COMPUTER ERROR IS DETECTED THE HG60 WILL SHUT DOWN.
SLEEP MODE: WHEN THE GUN HAS NOT BEEN USED FOR 2 MINUTES THE ELECTRONICS WILL GO TO "SLEEP". THIS PRESERVES BATTERY LIFE. BATTERY LIFE EXPECTANCY IS 12-18 MONTHS (DEPENDING ON USE).
THE GUN CAN BE USED IN MANUAL MODE IF REQUIRED
IN ADDITION TO THE STANDARD MANUAL AND AUTO MODE FUNCTIONS, THERE ARE 5 PRE-SETABLE TOTALS WHICH CAN BE CHANGED FOR FREQUENTLY REQUIRED VOLUMES.
3 VOLT TECHNOLOGY FOR LONG BATTERY LIFE.

TM FUEL FLOWMETER

A reliable electronic digital turbine flowmeter for the measurement of fuels, the TM is ideal for the use with Macnaught’s range of hand operated and electric fuel pumps, or can be installed in an in-line meter application.

Features
· measures diesel, kerosene and petrol
· exceptional repeatability and high accuracy over a wide range of viscosities and flow rates
· supplied with 2 x 1" NPT (M) x ¾" NPT (F) reducing bushes, and 1 x ¾" NPT nipple
· low pressure drop and high pressure rating allows for gravity and pump (in-line) applications
· 5 year warranty (conditions apply)
· 10 year parts availability

DM100 FLOWMETER

The new DM100 flowmeter has been made from corrosion resistant aluminium with easy to read mechanical registers that can be easily field calibrated.

Features
· measures diesel, kerosene and petrol
· nutating disc for fast and accurate metering
· exceptional repeatability and high accuracy over a wide range of viscosities and flow rates
· low pressure drop and high pressure rating allows for gravity and pump (in-line) applications
· supplied with a wire mesh strainer
· 5 year warranty (conditions apply)
· 10 year parts availability
· wetted components: aluminium, stainless steel, glass bead polyester, nitrile
rubber